.

Ecumaster ADU - Advanced Display Unit
Ecumaster ADU - Advanced Display Unit
Ecumaster ADU - Advanced Display Unit
Ecumaster ADU - Advanced Display Unit
Ecumaster ADU - Advanced Display Unit
Ecumaster ADU - Advanced Display Unit

Ecumaster ADU - Advanced Display Unit

£1,018.80
Tax included
Ecumaster ADU Size
Quantity

The ADU comes with multiple pre-configured pages, which can be customized by the end user to display data required at every race stage (e.g. practice, qualification, race, troubleshooting, etc.) and changed manually or automatically (based on an advanced conditions system). Each channel displayed on a page (gauges, icons, texts, etc.) can be easily modified using user-friendly, Windows based software. Our comprehensive overlay system facilitates a multiple page display for important data (e.g. low oil pressure, best lap, etc.) independently of the actual page displayed.

Flush mount panels for ADU7 are available here and for ADU5

For logging, you need good quality USB memory we recommend this tried and tested memory stick

To communicate with the ADU you need a CAN bus interface, it is possible to use PEAK-System or Kvaser or Ecumaster.

Ecumaster USB to CAN found here

Features

Lap timer: Lap timer with memory, predictive timing, triggered by a beacon or GPS

Customization: 48 available pages, user defined content, custom graphics allowed

Functions: User configurable maths and logic

Overlays: Yes user defined

CAN stream: User defined, up to 48 input messages, predefined streams for popular ECUs

General specification

Operating voltage: 6-22V, immunity to transients according to ISO 7637, with reverse polarity protection

CPU: 32 bits, automotive, 90MIPS

Temperature range: -30°C to 80°C

Enclosure: Anodized aluminium, CNC machined, IP61

Connection: Automotive 36-way AMP

ADU 5": Antiglare TFT, 800x480, active area 108x64.8 mm, luminance 600 cd/m2

ADU 7": Antiglare TFT, 800x480, active area 154.08x85.92 mm,

Alarms: 15 x ultrabright RGB LEDs used for alarms and shift lights

Communication

CAN: 2x CAN 2.0B (250, 500, 1000 kbps) independent

Serial: RS232 (Rx, Tx)

USB: Yes, for data logging

Inputs

Analog: 8 analogue inputs, 10 bits, 500Hz, software selectable pullups/pulldowns

Digital 8 inputs with user defined sensitivity

Outputs

Aux outputs 2 x protected 3A low side outputs

Logging

Memory: USB Flash Memory

Rate: 500Hz

Clock Yes

Others

Accelerometer: 3 axis gyro and 3 axis acceleration

Light sensor: Yes for auto brightness functionality

Temperature sensor: Built in to trace device internal temperature

Real time clock: yes with internal power supply

Read more

Specific References

0
0